5. Advanced operation
The available failover inputs for your display are:
•
None
•
DVI
•
SDI
The failover input can only be selected when both
1. the
Auto search
function is disabled (see "Auto search", page 26), and
2. the
2nd Picture Mode
function is disabled (see "2
nd
Picture Mode", page 27).
If any of both functions are enabled then failover will be disabled and made unavailable.
As soon as both functions are disabled again, failover will be enabled and made avail-
able again with the selected failover input.
The failover input will be activated within about 7 seconds after the main input (Display-
Port or Nexxis) has been lost.
During the transition from main to failover input and vice versa, a text message is visible
to inform the user.
The main source can be changed while the failover input remains unchanged. During the
selection and synchronization of a new main source the failover function is temporary
(7 sec) disabled.
To select the failover input
1. Bring up the OSD main menu.
2. Navigate to the
Input Select
menu.
3. Enter the
Failover Input
submenu.
4. Select one of the available failover inputs and con
fi
rm.
5.3.5
2
nd
Picture Mode
About 2
nd
picture modes
This function allows the display to show a second input source as an inset window inside the main source.
The available 2
nd
picture modes for your display are:
•
Off
•
Large PiP: 50% of display height in top-right corner
•
Small PiP: 30% of display height in top-right corner
To select the 2
nd
picture mode
1. Bring up the OSD main menu.
2. Navigate to the
Input Select
menu.
3. Enter the
2
nd
Picture Mode
submenu.
4. Select one of the available 2
nd
picture modes and con
fi
rm.
K5902133 (451920612482) MDSC-8255 23/11/2017
27
