Barco IQ-Graphics 300, Руководство пользователя

Страница: 81 / 94

Installation Menu
13-3
5976367 BARCO IQ-G300 24092001
Projector Address
Changing the projector address
In some cases the projector address must be changed, for example if an unique RCU is used to control 2 or more projectors.
The projector address setting on the projector must match the setting on the RCU (see procedure in chapter "Getting started").
What can be changed ?
Within the 'Change Projector Address' menu, the following items can be changed (See Chapter 'Getting started" for more info):
- Projector address: address defined by the user, may be from 0 to 255
- Common address : address may be 0 or 1
How to change the projector's RC5 address ?
1 Press MENU to activate the Toolbar
2 Use è to select the Installation item
3 Press ê to Pull down the Installation menu
4 Press ê to select Projector address
5 Press ENTER to select the item (menu 2), a dialogbox appears on the screen (Image 2)
6 Press ENTER to enable changing (Image 3)
Projector RC5 address
3URMHFWRUDGGUHVVHV
0 Common RC5 address
0
Projector RC5 address
3URMHFWRUDGGUHVVHV
0 Common RC5 address
0 0 0
0 0
Image 2 Image 3
Entering the new projector address
Enter the new projector address with the digit keys on the RCU, the local keypad or the cursor keys (see "Using the dialogboxes"
in Chapter "Getting started")
This address must be between 0 and 255.