Barco IQ-Graphics 300, Руководство пользователя

Страница: 32 / 94

5-2
Getting Started
5976367 BARCO IQ-G300 24092001
Overview of Terminology
1 Function keys : user programmable keys with functions for direct access.
2 MENU : Menu key, to enter or exit the Toolbar menu.
3 A ddress key (recessed key), to enter the address of the projector (between 0 and 9). Press the recessed address key with
a pencil, followed by pressing one digit button between 0 and 9.
4 LOGO key : allows to recall the stored Logo (not in PiP mode)
5 PAUSE : to stop projection for a short time, press 'PAUSE'. The image disappears but full power is retained for immediate restarting.
6 STBY : stand-by button, to start projector when the power switch is switched on and to switch off the projector without switching
off the power switch.
Attention : Switching to Stand-by.
When the projector is running and you want to go to stand-by, press the stand-by key for 2 seconds.
7 Mute : to interrupt the sound reproduction(not yet implemented).
8 AUTO IMAGE : Auto image, to center the image on the active LCD surface using the APA (Automatic Picture Adjustment)
9 Numeric buttons : used for value input and direct input selection
1 RGB
2 PC
3 VIDEO
4 S-VIDEO
5 DVI
7 SDI
8 IQ-PC
9 Video selector
9b SOURCE button : this button allows to switch through the active (scanned) inputs
10 Lens controls : use these buttons to obtain the desired ZOOM, SHIFT, FOCUS .
11 VOL: use this button to obtain the desired sound level (not yet available)
12 Picture controls : use these buttons to obtain the desired picture analog level.
13 DIGI ZOOM : allows a digital Zoom of a part of the image.
14 FREEZ : press to freeze the projected image.
15 PIP : allows to activate the PICTURE IN PICTURE mode
16 ENTER : to start up the MENU or confirm an adjustment or selection in the MENU.
on the local keypad the ENTER button additionnaly accesses the PIP window resize function (see Chapter 9 "Tools Mode").
17 Cursor Keys on RCU or on the local keypad : to make menu selections or to access the toolbar.
18 BACK : to leave the selected menu or item (go upwards to previous menu).
19 EFFECTS: not yet implemented
20 PIP ADJUST: allows to select a PiP window and change its configuration on screen
21 RC operating indication : lights up when a button on the remote control is pressed. (This is a visual indicator to check the
operation of the remote control)
22 IR receiver : IR receiver
Indication LED'S
LED1 green = cool down sequence: flickers for 60 seconds after switching to standby
red= rescue program (software error )
LED2: red= error (hardware)
LED3: red= standby
green= IR acknowledgement