Barco IQ-Graphics 300, Руководство пользователя

Страница: 23 / 94

4-3
Connections
5976367 BARCO IQ-G300 24092001
5-cable Input
5 BNC input terminals
0.7Vpp ± 3 dB, 75
W
terminated.
Which signals can be connected to the 5-cable input
The following signals can be connected to these BNC connectors :
5 cable advanced configuration
Beside the standard RGB, component & sync signals, the advanced capabilities of the 5 cable input make processing of additional
signals possible.
See page 4-8 for more info about these additional features.
How to select an RGB input
Key in 1 on the RCU or push the "source" button on the local keypad (see remark on the "source" button on page 4-6).
Remark on Component Video signals (PR/Y/PB)
Some interfaces use progressive output signals with a double linefrequency of 30 kHz.
The video decoder used for the video signals is not appropriate for these signals since it can only handle 15 kHz signals.
This signal has therefore to be internaly redirected, this is done in the "Source selection" menu by selecting "Data on BNC's" instead
of "Component video" and by selecting "Cr/Y/Cb" in the advanced settings of the "Image file" menu.(See Chapter "Image files")
Table 1
,
,13876
6,*1$/6
5*%+9
5*
V
%
5*%6
&RPSRQHQW
5
*
%
+ 9
R G B H
V
R
G
s
B
Y
S B
PB
R
G
PR
- -
-
-
-