Barco IQ-Graphics 300, Руководство пользователя

Страница: 61 / 94

Tools Menu
9-3
5976367 BARCO IQ-G300 24092001
PIP layout 1-3
These are factory layouts, they can be edited and saved.
The operations allowed on PiP layout 1-3 in the Tools menu are :
-saving a layout (save, save as)
-renaming a layout
-deleting a layout
Personal layouts
Beside the 2 fixed layouts and the 3 factory layouts, one can set 5 additionnal layouts.
The operations allowed on personal layouts in the Tools menu are :
-saving a layout (save, save as)
-renaming a layout
-deleting a layout
PiP dedicated buttons
PiP Adjust : this button allows to focus on one particular window, this is shown with a white frame surrounding the selected window,
a source identification box is displayed in the right lower corner. Pressing the button removes the frame to the next window.
This can also be done via PiP adjust in the Tools menu.
The Source button on the local keypad has the same function as the PiP adjust button but browses only the active windows in full
screen mode.
If there is for instance no Data signal connected then the source button will only switch from Video1 to video2.
PiP : this button allows to browse through the different configurations, it has the same function as PiP select in the Tools menu.
Video625.c01
Video Source 1
Video625.c01
Video Source 1
Remark on the Video windows in the 2by2 layout
Since there is only one decoder, when in 2by2 configuration Video 1 and Video 2 are derived from the same video source.