4.4 The sta tus register
The status register stores information about which input is provided with a signal, which input is
switched to which output, and if autoswitch modus is enabled or disabled.
The following lists the bits of the Status Register, the
M
ost
S
ignificant
B
it is the most left bit, the
L
east
S
ignificant
B
it is the most right bit.
Bit
Auto Switch Out2 true
Out1 true
Reserved
Out2 target
Out1 target
Prsnt2
Prsnt1
MSB … LSB
Bit No.
Refers to
value
1
Input 1
[0]: there is no sync signal at input 1
[1]: there is a sync signal at input 1
2
Input 2
[0]: there is no sync signal at input 2
[1]: there is a sync signal at input 2
3
Output 1
(target value)
[0]: Digital input 1 is routed to output 1 (default)
[1]: Digital input 2 is routed to output 1
4
Output 2
(target value)
[0]: Digital input 1 is routed to output 2
[1]: Digital input 2 is routed to output 2 (default)
5
For future use
[0]: (hard coded specified as 0)
6
Output 1
(true value)
[0]: Digital input 1 is routed to output 1
[1]: Digital input 2 is routed to output 1
7
Output 2
(true value)
[0]: Digital input 1 is routed to output 2
[1]: Digital input 2 is routed to output 2
8
Auto switch
[0]: auto switch disabled
[1]: auto switch enabled (default)
Содержание Hermes DXD
Страница 1: ...DOC 3200 2 User s Manual ...
Страница 13: ...2 Summary This chapter gives an overview of the HERMES DXD ...
Страница 50: ...7 Technical Data ...