3.5 Operat ing Hermes DXD
After the cabling is done, you can switch on your system. In order to provide the graphic cards with the
correct timing, it is mandatory that H
ERMES
DXD is switched on before booting the controller!
The projection engines can be switched on or off: the timing information is received via the data cable
as soon as the connection is established.
Controlling
H
ERMES
DXD is done via RS232 Remote-Control. Either the commands are sent via a dedi-
cated protocol (RFTP = Remote File Transfer Protocol), or via the graphical user interface of H
ERMES
R
EMOTE
C
ONTROL
, a software tool to intuitively switch the required input to the desired output.
The graphical user interface is described in the user manual H
ERMES
R
EMOTE
C
ONTROL
.
In this manual, the open protocol is explained.
Содержание Hermes DXD
Страница 1: ...DOC 3200 2 User s Manual ...
Страница 13: ...2 Summary This chapter gives an overview of the HERMES DXD ...
Страница 50: ...7 Technical Data ...