![background image](http://html.mh-extra.com/html/barco/hermes-dxd/hermes-dxd_user-manual_473833021.webp)
3.4 Cabling
This block diagram gives an overview about the cabling of H
ERMES
DXD
Figure 3-4
cabling Hermes DXD
The cabling must be done before switching on H
ERMES
DXD or any other system
components!
Signal cables are available in different types (fibre or copper), different interfaces
(PanelLink-to-DVI, DVI-to-PanelLink, DVI-to-DVI) and different lenghts. Therefore
they are not included in the delivery of Hermes DXD, but can be ordered according
the actual requirements, please refer to
7.3 Parts List
3.4.1 Power S upply
Check the power rating on your outlet before connecting H
ERMES
DXD to a wall
outlet or to a power strip. See section
7.1.2 Power Supply
for the necessary technical
specification. Contact your facilities manager or a qualified electrician if you are not
sure what type of power is supplied to your building.
H
ERMES
DXD is designed to operate with single-phase power systems having a
grounded neutral conductor. To reduce the risk of electrical shock, do not plug into
any other type of power system.
Make sure that the main switch is in the off position. Plug in the female end of the power cord into
AC In
.
H
ERMES
DXD offers a power outlet
AC Out
for connecting another H
ERMES
DXD. When operating
more than one H
ERMES
DXD then up to 10 devices in total may be connected in series. Thus a clear lay-
out of cabling is possible.
AC Out
is connected directly to
AC In
and is live as soon as
AC In
is connected to a
power supply.
Only Hermes DXD devices are allowed to be plugged into the AC Out of a Hermes
DXD.
Содержание Hermes DXD
Страница 1: ...DOC 3200 2 User s Manual ...
Страница 13: ...2 Summary This chapter gives an overview of the HERMES DXD ...
Страница 50: ...7 Technical Data ...