Command “k”: Disabling auto switch
Description: Via this command the
RCM
tells the
RCS
of class
m
to disable auto switch
The
RCS
executes the command and sends the acknowledge which informs via the status
register about the auto switch status.
Example:
The command
k
is sent to the second
RCS
:
Message
<STX> <TYPE> <ADDRH> <ADDRL>
<Body>
<STATH>
<STATL
<CHKH>
<CHKL> <ETX>
m
0
2
k
3
a
case 1:
auto switch was already disabled: nothing changes
case 2:
auto switch has been enabled before and is now disabled
Since this command only affects the auto switch, the status of the inputs and outputs does
not matter and are assumed 1. The assumptions are written in italic. Then the status re-
gister looks like this:
Status
Auto Switch
Out2
true
Out1
true
Reserved
Out2
target
Out1
target
Prsnt2
Prsnt1
0
1
1
0
1
1
1
1
In both cases the acknowledge sent from the
RCS
to the
RCM
is the same:
Acknowledg
e
<STX> <TYPE> <ADDRH> <ADDRL>
<Body>
<STATH>
<STATL
<CHKH>
<CHKL> <ETX>
m
0
2
k
6
f
d
6
Result:
auto switch functionality is disabled.
Содержание Hermes DXD
Страница 1: ...DOC 3200 2 User s Manual ...
Страница 13: ...2 Summary This chapter gives an overview of the HERMES DXD ...
Страница 50: ...7 Technical Data ...