![background image](http://html.mh-extra.com/html/barco/hermes-dxd/hermes-dxd_user-manual_473833035.webp)
Command "t": interconnection digital input 1 to digital output 1
Description: Via this command the
RCM
tells the
RCS
of class
m
to switch the signal of the first input
(
DIGITAL IN 1
) to the first digital output
DIGITAL OUT
1
.
The
RCS
executes the command and sends the acknowledge which informs via the status
register about the auto switch status (enabled or disabled) and if there is a sync signal on
DIGITAL IN 1
or not.
These conditions together determine the behavior of the
RCS
.
Example:
The command
t
is sent to the second
RCS
:
Message
<STX> <TYPE> <ADDRH> <ADDRL>
<Body>
<STATH>
<STATL
<CHKH>
<CHKL> <ETX>
m
0
2
t
4
3
Let's assume the first input is not provided with a signal. Depending on the status of
autoswitch,
DIGITAL OUT 1
is routed to
DIGITAL IN 2
(autoswitch enabled, sync signal
present on input 2), or the projection module is white.
Let's further assume: autoswitch enabled, sync signal present on input 2, output 2 routed
to input 2.
Thus the status register looks like this:
Status
Auto Switch
Out2
true
Out1
true
Reserved
Out2
target
Out1
target
Prsnt2
Prsnt1
1
1
1
0
1
0
1
0
Thus the acknowledge sent from the second RCS to the master reads:
Acknowledge <STX> <TYPE> <ADDRH> <ADDRL>
<Body>
<STATH>
<STATL
<CHKH>
<CHKL> <ETX>
m
0
2
t
e
a
0
9
Result:
The actual routing of
DIGITAL OUT 1
is different from the target routing, and the signal
present on
DIGITAL INPUT 2
is displayed on the projection module connected to
DIGITAL
OUT 1
. As soon as there is a signal present on
DIGITAL INPUT 1
, the routing changes to
the target routing!
5.3.2 Switchi ng the Digital Output 2
The
Digital Output 2
can be switched to the
Digital Input 2
or to the
Digital Input 1
.
In case there is a signal present on the desired input, the
target routing
will be the
actual routing
.
In case there is no signal present on the desired output, the
autoswitch
functionality determines the
routing: if enabled, the output is automatically routed to the other input, and the
actual routing
then
differs from the
target routing
. If disabled, the output will be non the less switched to the
target
input
and the projection module will be white (no picture, since there is no input signal).
In the status register, the correlated bits output 2 target / output 2 true (output 1 target / output 1 true)
can be compared to check the configuration.
On the device, the LEDs of the inputs indicate whether a signal is present or not, whereas the LEDs of
the outputs show which input is routed (green: input 1, orange: input 2)
Содержание Hermes DXD
Страница 1: ...DOC 3200 2 User s Manual ...
Страница 13: ...2 Summary This chapter gives an overview of the HERMES DXD ...
Страница 50: ...7 Technical Data ...