3.1 Examin ing
Figure 3-1
Hermes DXD
3.1.1 The Fro nt Panel
The front panel of your H
ERMES
DXD looks like this or similar:
1
POWER
DIGITAL OUT 2
DIGITAL OUT 1
DIGITAL IN 2
DIGITAL IN 1
REMOTE OUT
REMOTE IN
2
3
4
5
6
7
8
9
10
11
Figure 3-2
Front Panel of Hermes DXD
1
REMOTE IN
2
REMOTE OUT
3
LED: DIGITAL IN 1
4
DIGITAL IN 1
5
LED: DIGITAL IN 2
6
DIGITAL IN 2
7
LED: DIGITAL OUT 1
8
DIGITAL OUT 1
9
LED: DIGITAL OUT 2
10
DIGITAL OUT 2
11
LED
: POWER
The
REMOTE IN
socket [1] is for plugging in the remote control cable coming from the previous device
(or the controlling PC), the
REMOTE OUT
[2] for the cable leading to the next device.
The
DIGITAL IN 1
socket [4] is for connecting H
ERMES
DXD with the graphic card of a graphical con-
troller. The DVI cable is plugged in here. If a signal is applied to
DIGITAL IN 1
, the LED [3] is green,
else off.
The
DIGITAL IN 2
socket [6] is for connecting H
ERMES
DXD with the graphic card of a graphical con-
troller. The DVI cable is plugged in here. If a signal is applied to
DIGITAL IN 2
, the LED [5] is orange,
else off.
The
DIGITAL OUT
1
socket [8] is for connecting H
ERMES
DXD with the projection unit of a Barco pro-
jection cube. If the signal of
DIGITAL IN 1
is applied to
DIGITAL OUT 1
, the LED [7] is green, if the sig-
nal of
DIGITAL IN 2
is applied to
DIGITAL OUT 1
, the LED [7] is orange.
The
DIGITAL OUT
2
socket [10] is for connecting H
ERMES
DXD with the projection unit of a Barco
projection cube. If the signal of
DIGITAL IN 1
is applied to
DIGITAL OUT 2
, the LED [9] is green, if the
signal of
DIGITAL IN 2
is applied to
DIGITAL OUT 2
, the LED [9] is orange.
The LED
POWER
[11] indicates the device is switched on and operating properly. If the LED is off,
H
ERMES
DXD is switched off or the internal logic control has detected an error.
Содержание Hermes DXD
Страница 1: ...DOC 3200 2 User s Manual ...
Страница 13: ...2 Summary This chapter gives an overview of the HERMES DXD ...
Страница 50: ...7 Technical Data ...