Barco DICOM THEATER, Системное руководство, Страница: 75 / 82

System manual DICOM Theater 76
However, if the stabilization process terminates automatically, then the
user cannot restart it again via the application. The user is required to
go to MediCal Pro and activate the preset of her or his choice. This will
re-activate the stabilization process.
E.g., in case the user switches inputs or presets by means of the
projector’s remote control unit, stabilization will stop automatically. It
can be re-started only by activating a preset in MediCal Pro.
Stopping stabilization manually
If for some reason you wish to stop the projector stabilization (e.g., in
case there is too much ambient light), proceed as follows:
1 Position the cursor over the Dicom Theater sys-tray icon and click
the right mouse button (“right-click”).
The Dicom Theater menu appears.
2 Click Stop Stabilizer.
The stabilization process will stop.
Restarting stabilization manually
To restart the projector stabilization, proceed as follows:
1 Position the cursor over the Dicom Theater sys-tray icon and click
the right mouse button (“right-click”).
The Dicom Theater menu appears.
2 Click Start Stabilizer.
The stabilization process will restart.