Barco DICOM THEATER, Системное руководство

Страница: 10 / 82

System manual DICOM Theater 11
of the I-Guard
®
optical sensor, incorporated in the bezel of the display.
The MediCal Pro software is used for defining the Preset the display
devices must be conform to and calibrate them to make them conform
to the Preset.
The Dicom Theater software is a systray tool normally operating in
background. With the aid of the external optical sensor, this piece of
software ensures the stabilization of the projector. In addition, you can
use the Dicom Theater software to control some of the projector’s
functions.
Contents of the package
Please refer to the packing list on the outside of the DICOM Theater
box.
Please contact BARCO if the content of the package does not
correspond to the list.
Other relevant documentation
• MediCal Pro
®
Installation and User Manual: Describes in detail how
to install and use the MediCal Pro software.
• Owner’s manual for Medical Grade Projector MGP 10: Describes in
detail how to connect, use and control the MGP 10 projector.
• Installation Manual Ceiling Mount for MGP 10: Describes in detail
how to install the ceiling mount kit for the MGP 10 projector.
• Display User Manual
Important installation considerations
Preparations before installation
1 Make sure all equipment is switched off.
2 In case you use a PCI extension box, please install the box
following the guidelines in its Installation or User's guide.
DICOM Theater installation overview
To install the DICOM Theater system completely, you have to
follow these steps:
1 Install the BarcoMed imaging board(s) in the PC. For more
information, please refer to the section about the “Imaging board
installation”.