Barco DICOM THEATER, Системное руководство, Страница: 39 / 82

System manual DICOM Theater 40
10. If you selected a device with an existing driver, the wizard will
compare the existing driver’s version against the version of the
driver you are installing. If the existing driver’s version is newer
than the one you are installing, the wizard will warn you that the
current driver is newer than the one you are installing (figure 15).
Figure 15
Click “OK” to continue. If you don’t want to replace the existing
driver, click “OK” and then click “Cancel”.
11. The “Device Confirmation” screen displays the device driver that
will be installed. If you want to change your selection, click “Back”
to return to the Device Selection Screen. Click “Next” to begin
installing the driver. Click “Cancel” to abort the driver installation.
Special Note: Once you click “Next”, you cannot cancel the driver
installation.
12. Prior to beginning the installation the BarcoMed Driver Install
Wizard will warn you that while the driver is being installed your
display may flicker. Click “OK” to continue.
13. When the screen shown in figure 16 below appears, click
“Continue Anyway”. This screen may appear multiple times.
Figure 16
14. When the Wizard tells you that it has successfully installed the
selected driver, click “Finish”. The wizard will now begin installing