Barco Coronis MDCC 2121, Руководство по началу работы

Страница: 19 / 75

Display parts, controls and connectors
19
To display the OSD (on-screen display). In the OSD, this button acts
as Enter button to make selections.
4. Standby
To put the display in standby mode.
5. Ambient light sensor
Senses the ambient light around the display. The ambient light
measurement is taken into account in the DICOM display function
calibration.
6. Power LED
Indicates the display’s power status.
Green:
Display is on (when enabled in the OSD).
Orange:
Display is in Standby power-saving mode.
Off:
Display is disconnected from the power or the LED’s on state is
disabled in the OSD.
Note:
When the LED is disabled in the OSD, it will still be
activated (green) when the display is on but does not receive any
video signal.
7. I-Guard sensor
Constantly measures and stabilizes the display light output and
(on a color display only) color temperature.