Barco Coronis MDCC 2121, Руководство по началу работы

Страница: 68 / 75

General tips
68
If you installed your B
ARCO
C
ORONIS
Display System drivers in
SingleView
mode (default for Windows 2000) there will be one
rectangle for the virtual display representing the two heads
controlled by each Coronis display controller.
If you installed your B
ARCO
C
ORONIS
Display System drivers in
DualView
mode (default for Windows XP) there will be a rectangle
representing each head controlled by each Coronis display
controller. This will be true even if you have only one display
connected to your Coronis controller. Both displays of a display
controller cannot be enabled at the same time unless their display
properties match. If necessary detach the second display of the
Coronis display controller you are working with by right clicking on
the
rectangle
that represents it, deselect
Attached
and click the
Apply
button.
Note:
Since Windows will not let you detach the primary display
connected to a particular controller, you may need to temporarily
make another display the primary display
4.
For the display which is still attached click Click on the
Advanced
Button.
5.
Select the
Adapter
tab and then click on the
List All Modes
button. Select the resolution and refresh rate that your B
ARCO
C
ORONIS
Display display supports from the dialog box and click
OK
.
Note:
In the Adapter box, the Adapter string shows if this
display is the First View or the Second View attached to the display
controller. Please make a note of this, so that you can arrange the
displays in the correct order later if necessary.
6.
Click
OK
on the bottom of the
Adapter Control Panel
. If the
“OK”
button on the bottom of the
Adapter Control Panel
is not visible,
press the
TAB
key once and then press
CTRL+Enter
to select
OK
.
7.
Click
OK
in the “Windows will now apply your new desktop
settings” dialog box. Your B
ARCO
C
ORONIS
Display display should
now synchronize and display the Windows desktop.
8.
Click
Yes
when asked, “Your desktop has been reconfigured. Do
you want to keep these settings?”