Barco Coronis MDCC 2121, Руководство по началу работы

Страница: 56 / 75

Installing drivers and software
56
• Windows Server 2003 x64 Edition.
You will need to install the B
ARCO
C
ORONIS
Display system drivers and
software in the following cases:
• After you have installed the display controller(s) for your B
ARCO
C
ORONIS
Display System in your system for the first time.
• After you have reinstalled or upgraded your operating system.
1.
Start your system. When the
Found New Hardware Wizard
comes
up, click
Cancel
. When the
System Settings Change
window asks
you to restart your computer, click
No
.
2.
Run the Barco Product Installation Wizard.
The Barco Product Installation Wizard should start automatically if
you insert the B
ARCO
C
ORONIS
Display System Installation CD-ROM
into your CD drive
after
the operating system has started. If your
CD drive’s auto-run is not enabled or the Barco Product Installation
Wizard does not start automatically, you can run the Barco Product
Installation Wizard manually by following these steps:
a)
Click the
Start
button in the task bar.
b)
Click
Run
.
c)
Click
Browse
and browse to the root directory of the B
ARCO
C
ORONIS
Display System Installation CD-ROM and click on the
file,
Setup.exe,
and click
Open
.
d)
Click
OK
.
or
a)
Browse to the root directory of the B
ARCO
C
ORONIS
Display
System Installation CD-ROM and double click on the file,
Setup.exe
.
3.
Click
Next
on the Welcome page.
4.
Click
Next
on the Components to be installed page.
5.
Follow the wizard’s on-screen instructions to complete the
installation.
Note:
When the page shown in figure 28 appears you may
either click
Next
to accept the default settings or if you know the