Barco Coronis MDCC 2121, Руководство по началу работы

Страница: 35 / 75

Single-head installation
35
Single-head installation
To attach the panel unit to the display stand:
1.
Take the display stand from the packaging and put it on a solid flat
surface.
2.
Take the panel unit from the packaging and hold it in portrait
position. The I-Guard should be positioned bottom right.
3.
Hook the top gaps in the rear of the panel (1) over the top anchors
of the stand attachment plate (2). see figure 12.
4.
Push the bottom of the panel firmly towards the stand so that the
bottom anchors (3) clip in the bottom gaps (4).
5.
Check that the panel is
firmly attached
to the stand.
Figure 12: Attaching the panel to the display stand
To detach the panel unit from the display stand:
1.
Firmly push the push-button at the rear of the panel (5) or (6).
Push button (5) to release the panel in landscape position. Push
button (6) to release the panel in portrait position.
2.
Pull the bottom of the panel towards you and at the same time lift
the panel from the stand attachment plate.
1
2
c
d
e
f
g
h