Barco Coronis 5MP Mammo, Руководство по началу работы, Страница: 72 / 88

Configuring Windows
72
will be one rectangle for the virtual display representing the two
heads controlled by each BarcoMed display controller output.
If you installed your B
ARCO
C
ORONIS
5MP M
AMMO
Display System
drivers in
DualView
mode (default for Windows XP) there will be
a rectangle representing each head controlled by each output of
the display controller. This will be true even if you have only one
display connected to your BarcoMed controller. Both displays of a
display controller cannot be enabled at the same time unless
their display properties match. If necessary detach the second
display of the BarcoMed display controller you are working with
by right clicking on the
rectangle
that represents it, deselect
Attached
and click the
Apply
button.
Note:
Since Windows will not let you detach the primary
display connected to a particular controller, you may need to
temporarily make another display the primary display
4.
For the display which is still attached click Click on the
Advanced
Button.
5.
Select the
Adapter
tab and then click on the
List All Modes
button. Select the resolution and refresh rate that your B
ARCO
C
ORONIS
5MP M
AMMO
Display display supports from the dialog box
and click
OK
.
Note:
In the Adapter box, the Adapter string shows if this
display is the First View or the Second View attached to the
display controller. Please make a note of this, so that you can
arrange the displays in the correct order later if necessary.
6.
Click
OK
on the bottom of the
Adapter Control Panel
. If the
“OK”
button on the bottom of the
Adapter Control Panel
is not visible,
press the
TAB
key once and then press
CTRL+Enter
to select
OK
.
7.
Click
OK
in the “Windows will now apply your new desktop
settings” dialog box. Your B
ARCO
C
ORONIS
5MP M
AMMO
Display
display should now synchronize and display the Windows
desktop.
8.
Click
Yes
when asked, “Your desktop has been reconfigured. Do
you want to keep these settings?”