Barco Coronis 5MP Mammo, Руководство по началу работы, Страница: 61 / 88

Driver and Software Installation
61
7.
When the Setup complete message appears, select
Reboot
System Now
and click
Finish
.
8.
After the system reboots, Windows may display either the
Digital Signature Not Found
message or
The software you are
installing for this hardware has not passed Windows logo
testing
.
Automated display configuration
Once the drivers, software and documentation have been installed
and your system has been rebooted, the
Barco Monitor Plug and Play
Software
should automatically detect your Barco displays and attach
them to the desktop with the correct resolution. If the
Barco Monitor
Plug and Play Software
fails to detect your Barco displays or fails to
attach them to the desktop correctly please refer to the section,
Setting the resolution of your Barco Coronis Display
in the
Configuring Windows
section of this manual.
Reinstalling drivers
You can install new drivers or reinstall existing drivers at any time by
using the Barco Set-up wizard on your B
ARCO
C
ORONIS
5MP M
AMMO
Display System Installation CD-ROM, see
Installing the B
ARCO
M
ED
C
ORONIS
or Nio drivers and software
, on page 58 of this manual.
Uninstalling the drivers and software
To uninstall the Barco drivers, software or documentation for your
Barco Coronis 5MP Mammo Display Systems, please use the
Windows
Add/Remove Programs
or
Uninstall
utility. This can be found in the
Windows Control Panel. For Vista use
Programs & Features
Note:
If you installed your B
ARCO
M
ED
C
ORONIS
or Nio drivers with
DualView enabled, the wizard will warn you that DualView must
be disabled before the drivers can be uninstalled. This is normal,
please follow the prompts from the wizard.