Barco Coronis 5MP Mammo, Руководство по началу работы

Страница: 55 / 88

Driver and Software Installation
55
8.
Follow the wizard’s on-screen instructions to complete the driver
installation.
Note:
The driver installation may take up to 5 minutes, and
the monitor may blink a few times during the installation
process.
Note:
For “non-English” operating systems, you may
encounter multiple pop-up screens. If this occurs, click the
appropriate buttons to complete the installation.
9.
When the driver setup is complete, click the
Finish
button.
10.
When the Setup complete message appears, select
Reboot
System Now
and click
Finish
.
11.
After the system reboots, Windows may display either the
Digital Signature Not Found
message or
The software you are
installing for this hardware has not passed Windows logo
testing
.
Automated display configuration
Once the drivers, software and documentation have been installed
and your system has been rebooted, the
Barco Monitor Plug and Play
Software
should automatically detect your Barco displays and attach
them to the desktop with the correct resolution. If the
Barco Monitor
Plug and Play Software
fails to detect your Barco displays or fails to
attach them to the desktop correctly please refer to the section,
Setting the resolution of your Barco Display
in the
Configuring
Windows
section of this manual.
Reinstalling drivers
You can install new drivers or reinstall existing drivers at any time by
using the Barco Set-up wizard on your B
ARCO
C
ORONIS
5MP M
AMMO
Display System Installation CD-ROM, see
Installing the B
ARCO
MXRT
drivers and software
, on page 52 of this manual.