Barco CORONIS 1MP, Системное руководство

Страница: 64 / 113

System manual Coronis 1MP 65
BarcoMed software driver installation
Figure 8
10. The “Customer Information” screen will appear. The Installer will
automatically fill in the blanks using the information entered when
Windows was installed on your system. You may change this
information if you wish. Click
“Next” to continue.
11. The “Setup Type” page will now appear. Choose “Typical” to
install the default schemes with English names. Choose
“Custom” to install the default schemes with either Dutch or
German names. Currently the default schemes are not supported
in the Japanese, Korean and Chinese languages. We
recommend that the users of these three languages install the
English default schemes and then rename and save them into
their language in the DPMS configuration screen. Click
“Next” to
continue.
12. The “Ready to Install Program” page will now appear, click
“Install” to install DPMS.
During installation the wizard will display a progress screen.
13. When the Windows Installer has finished installing DPMS, the
“Installshield Wizard Completed” page will appear, click “Finish”
to exit the BARCO DPMS InstallShied Wizard and return to the
BarcoMed Product Install Wizard Welcome Screen.
After returning to the BarcoMed Product Install Wizard Welcome
Screen, the wizard will clear the checkbox next to DPMS Screen
Saver and will automatically launch the CORONIS Rotation Service
Install Wizard if the CORONIS Rotation Service was selected when
you began.
If the installation of the products you selected at the beginning is
complete, click
“Finish” to exit the BarcoMed Product Install Wizard