Barco CORONIS 1MP, Системное руководство

Страница: 108 / 113

System manual Coronis 1MP 109
BarcoMed software driver installation
CORONIS ROTATION SERVICE
Overview
Special Note: The CORONIS Rotation Service is only available for
systems which have the Portrait Accelerator in the CORONIS
Display Panel and BarcoMed Display Driver releases that include the
CORONIS Rotation Service . The CORONIS Rotation Service may
not be available for your system.
The CORONIS Rotation Service is designed to detect changes in the
physical orientation of the rotatable CORONIS flat-panel display(s)
and to change the resolution of the display to match the physical
orientation of the display. The CORONIS Rotation Service will
support up to eight CORONIS flat-panel displays on four BarcoMed
Display Controllers. The CORONIS Rotation Service supports
Windows NT 4.0 Service Pack 4 and above, Windows 2000 and
Windows XP.
The CORONIS Rotation Service is designed to react
only to changes
in physical orientation of the CORONIS flat-panel displays, not to
changes in screen resolution effected from the Windows Display
Control Panel. The CORONIS Rotation Service functions only after
the CORONIS Windows Display Controller Drivers have been
installed, the resolution set using the Windows Display Control
Panel and the CORONIS Rotation Service has been installed.
CORONIS Rotation Service will have a limited user interface
available through an icon in the system status tray. The system tray
icon is just a toggle to put the service to sleep. During this sleeping
phase, the Service will continue to track changes in the physical
orientation. The service will use these saved settings to set the
appropriate state model on startup.
Windows NT 4.0
Because Windows NT 4.0 supports only one type of display
controller at a time, rotating a single head will affect the
resolution for all the displays connected to all the BarcoMed
Display Controllers installed in your system.
Windows 2000 and Windows XP
Although Windows 2000 and Windows XP support multiple
types of display controllers, they support only one resolution
per display controller. Rotating a single head on any given
BarcoMed Display Controller will affect both of the heads
connected to that display controller. If you change the
physical orientation of one CORONIS display connected to
any given BarcoMed Display Controller, the CORONIS