Barco CORONIS 1MP, Системное руководство

Страница: 24 / 113

System manual Coronis 1MP 25
Best resolution
The optimum and recommended resolution is 1280 x 1024 or 1024 x
1280 (if the Portrait Accelerator option is installed).
The recommended refresh rate is 60 Hz.
Would you have trouble selecting a proper display setting in
Windows, please refer to the Troubleshooting section further.
BARCO’s BarcoMed 1MP2FH display controller is the best choice to
drive the MFGD 1318 display.
Power saving (DPMS)
The MFGD 1318 is equipped with a power saving system.
When left idle for a certain time, the computer connected to the
display, will power down the display. The power saving system can be
switched on or off using the on-screen menus.
This system requires a computer display controller that supports
power saving management.
Ambient Light Compensation (ALC)
When enabled, the ALC system automatically adapts the display light
output, depending on the ambient light in the room. The ambient light
is measured by the ALC optical sensor located at the front of the
display.
Package contents
The package should include the following items, please check. If some
of the items are missing, please contact the reseller from whom you
have purchased the unit.
- The MFGD 1318 display
- Power supply
- DVI cable
- Analog video cable
- USB cable
- Two velcro strips to bind the cables
- European power cord
- American power cord
- This user manual
If the display is part of a Coronis system, the package contains more
items. Please refer to the packing list on the outside of the Coronis
box.
Display installation