Barco ClickShare CSE-200, Руководство по установке

Страница: 60 / 85

6. CSE-200 Configurator
The EAP-TTLS mode window opens.
Image 6-27
Necessary Data to continue:
Domain The company domain for which you are enrolling, should match with the one de fi ned in your
Active Directory.
Identity
Identity of the user account in the Active Directory which will be used by the ClickShare Buttons to
connect to the corporate network.
Password The corresponding password for the identity that you are using to authenticate on the corporate
network. Per Base Unit each Button will use the same identity and password to connect to the
corporate network.
Corporate SSID The SSID of your corporate wireless infrastructure to which the ClickShare Buttons will connect.
Click Next to continue.
When having problems connecting the Button to your corporate network, to get feedback from the Button please have a look
at the ClickShare Client log. This log can be enabled by holding shift when starting the Client executable. Look for the lines
“EDSUSBDongleConnection::mpParseDongleMessages” . An error code and a short summary of the issue should be logged.
6.15 Network integration, PEAP security mode
About PEAP
PEAP (Protected Extensible Authentication Protocol) is an EAP implementation co-developed by Cisco Systems, Microsoft and RSA
Security. It sets up a secure TLS tunnel using the servers CA certi
fi cate after which actual user authentication takes place within the
tunnel. This way of working enables it to use the security of TLS while authenticating the user but without the need for a PKI.
The standard does not mandate which method is to be used to authenticate within the tunnel. But in this application note, with regard
to PEAP, we are referring to PEAPv0 with EAP-MSCHAPv2 as the inner authentication method. This is one of the two certi
fi ed PEAP
implementations in the WPA and WPA2 standards – and by far the most common and widespread implementation of PEAP.
How to start up for PEAP
1. Log in to the Con fi gurator .
2. Click WiFi & Network → Network integration . Click on Change con fi guraton .
3. Select the radio button next to PEAP and click Next .
48 R5900023 CLICKSHARE CSE-200 13/07/2016