Barco ClickShare CSE-200, Руководство по установке

Страница: 54 / 85

6. CSE-200 Configurator
Image 6-19
Proxy settings
The proxy settings become available.
2. Enter the proxy server address. Enter the IP address or hostname.
Some proxy servers need a port number, user name and password, for others is this optional.
3. Optionally, enter the used server port.
4. Optionally, enter the user name.
5. Optionally, enter the password.
6. Click Save changes to apply the settings.
6.12 Network integration, activation
Introduction
“ClickShare Network Integration” aims at deploying ClickShare in larger organizations without interfering with the existing wireless
network infrastructure. In a default stand-alone setup, the ClickShare Base Unit creates its own wireless access point (AP) which
the ClickShare Buttons use to connect. These so-called “rogue” APs can become a nuisance in larger installations. Next to that,
meeting participants who are sharing content from mobile devices have to switch networks to connect with the ClickShare Base Unit.
This is where ClickShare Network Integration comes in. Once fully con fi gured and enabled, the built-in AP of the Base Unit is
disabled. The Button or the mobile devices can then connect to a wireless access point that is part of the corporate network. At this
point, the Base Unit needs to be connected to the corporate network via the wired Ethernet interface so that the Buttons and mobile
devices can share their content on the Base Unit.
Image 6-20
Security modes
There are 2 security modes supported by the Button to connect to the corporate network:
•
The fi rst one, which applies to a typical corporate network setup, is WPA2-Enterprise with 802.1X.
• As we also want to support smaller organizations, which might have a more traditional Wi-Fi setup, there is also support for
WPA2-PSK, also known as WPA2-Personal.
Both modes are based on Wi-Fi Protected Access (WPA). We talk about WPA2, an improved version of the original WPA standard,
which adds AES encryption to improve security.
WPA2-Enterprise with 802.1X
42 R5900023 CLICKSHARE CSE-200 13/07/2016