Barco ClickShare CSE-200, Руководство по установке

Страница: 53 / 85

6. CSE-200 Configurator
Image 6-18
LAN settings
3. Click in the input fi eld next to Hostname and enter a host name for the Base Unit.
The default host name is ClickShare-<serial number Base Unit> .
4. To select the method, click on the drop down box next to Method and select the Automatic (DHCP) or Manual .
When Automatic (DHCP) is selected, the IP address, subnet mask and default gateway fi elds are grayed out but the currently
used settings are fi lled out.
5. Click Save changes to apply the settings.
Manual ( fi xed) IP address
1. Click on the drop down box next to Method and select Manual .
The IP address, subnet and gateway input fi elds are activated.
2. Click in the input fi eld of the IP address and fi ll out the 4 octets.
Note: An address contains 4 octets with a maximum value of 255.
This must NOT be 0.0.0.0 for static IP-Address assignment
3. Click in the Subnet mask input fi elds and fi ll out the 4 octets as appropriate for the local subnet.
4. Click in the Default Gateway input fi elds and fi ll out the 4 octets. Set the Default-Gateway to the IP-Address of the router (MUST
be on the local subnet!).
Note: This must NOT be 0.0.0.0.
If there is no router on the local subnet then just set this fi eld to any IP-Address on the subnet.
5. Click Save changes to apply the settings.
Do not use IP address 192.168.2.x for a Subnet mask 255.255.255.0 and IP address 192.168.x.x for a Subnet
mask 255.255.0.0
Use a proxy server
This setting is important for the auto-update feature of the Base Unit, which require internet access.
1. Check the check box next to Use a proxy server.
R5900023 CLICKSHARE CSE-200 13/07/2016 41