![background image](http://html.mh-extra.com/html/barco/cine-8-r9002390/cine-8-r9002390_owners-manual_473933069.webp)
Service Mode
8-1
5976064 BARCOCINE 8 03052000
8
SERVICE MODE
Service mode.
Start Up
1. Push the cursor key
é
or
ê
to select to SERVICE (menu 1).
2. Press ENTER to select.
The service menu will be displayed (menu 2a or 2b).
Some items in the Service mode are password protected (when the password function is active). Enter your password to continue.
All other password protected items are now also available if you stay in the adjustment mode.
ADJUSTMENT MODE
Select with
é
or
ê
then <ENTER>
<EXIT> to return.
Select with
é
or
ê
then <ENTER>
<EXIT> to return.
SERVICE MODE
IDENTIFICATION
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
CHANGE PASSWORD
CHANGE LANGUAGE
RUN TIME
SET TO MIDPOSITION
CONVERGENCE MID
MORE ...
SERVICE MODE
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CRT RUN IN CYCLE
CRT DRIVE MODE
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
G2 ADJUSTMENT
GAMMA CORRECTIONS
PROJECTOR WARM UP
DYNAMIC ASTIGMATISM
Select a path from
below :
IRIS
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
source 1
menu 1
menu 2a
Overview flowchart
Select with
é
or
ê
then <ENTER>
<EXIT> to return.
SERVICE MODE
DYNAMIC ASTIGMATISM
G2 ADJUSTMENT
GAMMA CORRECTIONS
CRT RUN IN CYCLE
PROJECTOR WARM UP
CRT DRIVE MODE
MEMORY BANKS
COMMON ADDRESS
MORE ...
menu 2b
MEMORY BANKS
COMMON ADDRESS