![background image](http://html1.mh-extra.com/html/barco/barcovision-8100/barcovision-8100_owners-manual_473915068.webp)
5975617 BARCOVISION 8100 150197
SOURCE SET UP
5975617 BARCOVISION 8100 150197
SOURCE SET UP
S
O
URCE
S
E
T
UP
9-2
9-2
S
O
URCE
S
E
T
UP
INPUT SELECTION
Use the numeric keys on the RCU or use the local key pad to select the corresponding
input slot.
The source settings has to be installed for each source when these sources are
displayed for the first time.
INSTALLATION OF THE SETTINGS FOR A INPUT SOURCE.
Start up the adjustment mode by press-
ing
ENTER. The main menu will be
displayed.
Push the control stick key forward or
backward to highlight File service.
ENTER selects the highlighted item and
continues to the next step. EXIT returns
always to the previous step.
MAIN MENU
832c
Picture Control
System Settings
File service
Service Mode
* Select the
LOAD function to install the correct file. Only the files which can be for
this source will be shown. (See appendix A for a list of the standard available files).
File annotation :
xxxxxxxx.xxx (Sx, xxxXxxxi)
I or blanc : i = interlaced, blanc = not
interlaced
xxxXxxx : active pixel rating
Sx : source number
xxx : file extension, first character is C (for custom made files) or
S (for standard files).
The second and third character is used for a following number
(=file index)
file index for custom files : 00 to 63.
xxxxxxxx : base name, 8 characters.
The projector leaves the factory some custom files installed.
e.g.
source 1 (video) : pal.c01
source 1 (video) : ntsc.c02
INPUT SELECTION
Use the numeric keys on the RCU or use the local key pad to select the corresponding
input slot.
The source settings has to be installed for each source when these sources are
displayed for the first time.
INSTALLATION OF THE SETTINGS FOR A INPUT SOURCE.
Start up the adjustment mode by press-
ing
ENTER. The main menu will be
displayed.
Push the control stick key forward or
backward to highlight File service.
ENTER selects the highlighted item and
continues to the next step. EXIT returns
always to the previous step.
MAIN MENU
832c
Picture Control
System Settings
File service
Service Mode
* Select the
LOAD function to install the correct file. Only the files which can be for
this source will be shown. (See appendix A for a list of the standard available files).
File annotation :
xxxxxxxx.xxx (Sx, xxxXxxxi)
I or blanc : i = interlaced, blanc = not
interlaced
xxxXxxx : active pixel rating
Sx : source number
xxx : file extension, first character is C (for custom made files) or
S (for standard files).
The second and third character is used for a following number
(=file index)
file index for custom files : 00 to 63.
xxxxxxxx : base name, 8 characters.
The projector leaves the factory some custom files installed.
e.g.
source 1 (video) : pal.c01
source 1 (video) : ntsc.c02