![background image](http://html1.mh-extra.com/html/barco/barcovision-8100/barcovision-8100_owners-manual_473915105.webp)
5975617 BARCOVISION 8100 150197
APPENDIX D : LENS CLEANING PROCEDURE
AP
P
E
NDI
X
D :
LE
NS
CLE
ANI
NG
P
R
O
C
E
DURE
5975617 BARCOVISION 8100 150197
APPENDIX D : LENS CLEANING PROCEDURE
AP
P
E
NDI
X
D :
LE
NS
CLE
ANI
NG
P
R
O
C
E
DURE
D-1
D-1
LENS CLEANING PROCEDURE
Cleaning procedure for HD(1.5-3:1) lens and HD(3-5.3:1) lens.
To minimize the possibility of damaging the optical coating or scratching exposed lens
surface, we have developed recommendations for cleaning the lens. FIRST, we
recommend you try to remove any material from the lens by blowing it off with clean,
dry deionized air. DO NOT use any liquid to clean the lenses.
A Toraysee
TM
cloth is included with the lens kit.
Proceed as follows :
1. Always wipe lenses with a CLEAN Toraysee
TM
cloth.
2. Always wipe lenses in a single direction. Do not wipe back and forth across the lens
surface as this tends to grind dirt into the coating.
3. Do not leave cleaning cloth in either an open room or lab coat pocket, as doing so
can contaminate the cloth.
4. If smears occur when cleaning lenses, replace the cloth. Smears are the first
indication of a dirty cloth.
5. Do not use fabric softener when washing the cleaning cloth or softener sheets when
drying the cloth.
6. Do not use liquid cleaners on the cloth as doing so will contaminate the cloth.
Order number for a new Toraysee
TM
cloth : R379058.
Other lenses can also be cleaned in a safe way with this Toraysee
TM
cloth.
Cleaning procedure for the other HD lens
To minimize the possibility of damaging the optical coating or scratching exposed lens
surfaces, we have developed recommendations for cleaning lenses.
FIRST, we
recommend you try to remove any material from the lens by blowing it off with
deionized air or
lightly
brushing it with a soft, camel's hair brush.
Plastic lens with multilayer coatings & all glass lens elements.
1.
DO NOT spray any type of fluid directly on the lens surface.
2.
DO NOT use any dry material to clean the surface (dry rag, tissue, etc.)
3. Use a commercial liquid window cleaner.
DO NOT use an aerosol.
Other cleaning
agents, such as laboratory-grade acetone or a 70-30 mixture of ethyl ether and ethyl
alcohol may also be used. If you are not sure of the cleaning agent, experiment with
a small area of the lens first.
LENS CLEANING PROCEDURE
Cleaning procedure for HD(1.5-3:1) lens and HD(3-5.3:1) lens.
To minimize the possibility of damaging the optical coating or scratching exposed lens
surface, we have developed recommendations for cleaning the lens. FIRST, we
recommend you try to remove any material from the lens by blowing it off with clean,
dry deionized air. DO NOT use any liquid to clean the lenses.
A Toraysee
TM
cloth is included with the lens kit.
Proceed as follows :
1. Always wipe lenses with a CLEAN Toraysee
TM
cloth.
2. Always wipe lenses in a single direction. Do not wipe back and forth across the lens
surface as this tends to grind dirt into the coating.
3. Do not leave cleaning cloth in either an open room or lab coat pocket, as doing so
can contaminate the cloth.
4. If smears occur when cleaning lenses, replace the cloth. Smears are the first
indication of a dirty cloth.
5. Do not use fabric softener when washing the cleaning cloth or softener sheets when
drying the cloth.
6. Do not use liquid cleaners on the cloth as doing so will contaminate the cloth.
Order number for a new Toraysee
TM
cloth : R379058.
Other lenses can also be cleaned in a safe way with this Toraysee
TM
cloth.
Cleaning procedure for the other HD lens
To minimize the possibility of damaging the optical coating or scratching exposed lens
surfaces, we have developed recommendations for cleaning lenses.
FIRST, we
recommend you try to remove any material from the lens by blowing it off with
deionized air or
lightly
brushing it with a soft, camel's hair brush.
Plastic lens with multilayer coatings & all glass lens elements.
1.
DO NOT spray any type of fluid directly on the lens surface.
2.
DO NOT use any dry material to clean the surface (dry rag, tissue, etc.)
3. Use a commercial liquid window cleaner.
DO NOT use an aerosol.
Other cleaning
agents, such as laboratory-grade acetone or a 70-30 mixture of ethyl ether and ethyl
alcohol may also be used. If you are not sure of the cleaning agent, experiment with
a small area of the lens first.