![background image](http://html1.mh-extra.com/html/barco/barcovision-8100/barcovision-8100_owners-manual_473915060.webp)
5975617 BARCOVISION 8100 150197
CONTROLLING
5975617 BARCOVISION 8100 150197
CONTROLLING
CO
NTR
O
LLI
NG
8-4
8-4
CO
NTR
O
LLI
NG
S1
Projector address
switch
value
1
1
2
2
3
4
4
8
5
16
6
32
7
64
8
128
Example : address 83
DIP switch
1 2 3 4 5 6 7 8
setting
1 1 0 0 1 0 1 0
Summary : 1x1 + 1x2 + 0x4+ 0x8+ 1x16 +
0x32 + 1x64 + 0x128 = 83
b. How to control the projector or projectors.
The projector's address may be set to any value between 0 and 255. When the
address is set, the projector can be controlled now :
- RCU for addresses between 0 and 9.
- computer, e.g. IBM PC (or compatible), Apple MAC, etc. for addresses between
0 and 255.
Note : a projector will respond to a RCU set to an address of '0' regardless of what
address is set in the projector itself.
c. Using the RCU.
Before using the RCU, its is necessary to enter the projector address into the RCU
(only when that address is between 1 and 9). The projector with the corresponding
address will listen to that specific RCU.
When address 0, 'zero address' is programmed into the RCU, every projector, without
exception will listen to the commands given by this RCU.
S1
Projector address
switch
value
1
1
2
2
3
4
4
8
5
16
6
32
7
64
8
128
Example : address 83
DIP switch
1 2 3 4 5 6 7 8
setting
1 1 0 0 1 0 1 0
Summary : 1x1 + 1x2 + 0x4+ 0x8+ 1x16 +
0x32 + 1x64 + 0x128 = 83
b. How to control the projector or projectors.
The projector's address may be set to any value between 0 and 255. When the
address is set, the projector can be controlled now :
- RCU for addresses between 0 and 9.
- computer, e.g. IBM PC (or compatible), Apple MAC, etc. for addresses between
0 and 255.
Note : a projector will respond to a RCU set to an address of '0' regardless of what
address is set in the projector itself.
c. Using the RCU.
Before using the RCU, its is necessary to enter the projector address into the RCU
(only when that address is between 1 and 9). The projector with the corresponding
address will listen to that specific RCU.
When address 0, 'zero address' is programmed into the RCU, every projector, without
exception will listen to the commands given by this RCU.