![background image](http://html1.mh-extra.com/html/barco/barcovision-8100/barcovision-8100_owners-manual_473915062.webp)
5975617 BARCOVISION 8100 150197
CONTROLLING
5975617 BARCOVISION 8100 150197
CONTROLLING
CO
NTR
O
LLI
NG
8-6
8-6
CO
NTR
O
LLI
NG
Color Saturation
Color saturation is only active for Video and S-Video. Adjust the color intensity of the
picture.
Use the + button for richer colors.
Use the - button for lighter colors.
Tint Control
Tint is only active for Video and S-Video when using the NTSC 4.43 or NTSC 3.58
system.
Use the + button
Use the - button.
Sharpness Control.
Sharpness control is only active for Video and S-Video.
Use the + button for a sharper picture.
Use the - button for a softer picture.
Phase Control
Use the arrow keys to adjust the
phase. Within the total adjustment
range there are 2 or 3 areas where
the phase is correctly aligned.
Phase
0.......10.......20.......30........40.......50.......60
HOW TO CHANGE THE LAMP POWER MODE?
This lamp control function is only
available when the projector is pow-
ered with 230 Vac.
The choice exists to select Nominal
power mode or High power mode
(booster mode).
When using the high power mode, the
light output in ANSI lumen will be 20%
higher than in the normal power mode.
Take care, when using the high power
mode, the life time of the lamp will be
reduced by 33%.
To change the power mode, call the
SYSTEM SETTINGS
•
Lamp Control
Installation
Input slots
Summary
Color
Color Saturation
Color saturation is only active for Video and S-Video. Adjust the color intensity of the
picture.
Use the + button for richer colors.
Use the - button for lighter colors.
Tint Control
Tint is only active for Video and S-Video when using the NTSC 4.43 or NTSC 3.58
system.
Use the + button
Use the - button.
Sharpness Control.
Sharpness control is only active for Video and S-Video.
Use the + button for a sharper picture.
Use the - button for a softer picture.
Phase Control
Use the arrow keys to adjust the
phase. Within the total adjustment
range there are 2 or 3 areas where
the phase is correctly aligned.
Phase
0.......10.......20.......30........40.......50.......60
HOW TO CHANGE THE LAMP POWER MODE?
This lamp control function is only
available when the projector is pow-
ered with 230 Vac.
The choice exists to select Nominal
power mode or High power mode
(booster mode).
When using the high power mode, the
light output in ANSI lumen will be 20%
higher than in the normal power mode.
Take care, when using the high power
mode, the life time of the lamp will be
reduced by 33%.
To change the power mode, call the
SYSTEM SETTINGS
•
Lamp Control
Installation
Input slots
Summary
Color