![background image](http://html1.mh-extra.com/html/barco/barcovision-8100/barcovision-8100_owners-manual_473915036.webp)
5975617 BARCOVISION 8100 150197
LOCATION AND FUNCTIONS OF CONTROLS
LO
CATI
O
N
AND FUNCTI
O
N
S
O
F
CO
NTRO
LS
5975617 BARCOVISION 8100 150197
LOCATION AND FUNCTIONS OF CONTROLS
LO
CATI
O
N
AND FUNCTI
O
N
S
O
F
CO
NTRO
LS
5-6
5-6
Address key (sunk key), to enter the address of the projector (between 0 and
9). Press the sunk key with a pencil, followed by pressing one digit button
between 0 and 9.
STBY : stand by button : - to start projection when the power switch is
switched on.
- to switch off the projector without switching off the
power switch.
PAUSE : to stop projection for a short time, press 'PAUSE'. The image
disappears but full power is retained for immediate restarting.
Digit buttons : direct input selection.
Picture controls : use these buttons to obtain the desired picture analog
level (see also 'Controlling').
PHASE : to adjust the instability of the image.
TEXT : when adjusting one of the image, e.g. controls during a meeting, the
displayed bar scale can be removed by pressing 'TEXT' key first. To re-
display the bar scale on the screen, press 'TEXT' key again. 'TEXT' key only
active in operational mode.
FREEZ : to stop the image projection on the actual projected image.
ENTER : to start up the adjustment mode or to confirm an adjustment or
selection in the adjustment mode.
EXIT : to leave the adjustment mode or to scroll upwards when in the
adjustment mode.
Control stick key : to make menu selections when in the adjustment mode.
The control stick can move forward, backward, to the right or to the left.
Comparision between control stick movement and the use of the arrow keys
on the local keypad :
RCU
=
local keypad
control stick forward
=
arrow key up
control stick backward
=
arrow key down
control stick to the right =
right arrow key
control stick to the left
=
left arrow key
RC operating indication : lights up when a button on the remote control is
pressed. (This is a visual indicator to check the operation of the remote
control)
3
4
5
6
7
8
9
10
11
12
13
14
Address key (sunk key), to enter the address of the projector (between 0 and
9). Press the sunk key with a pencil, followed by pressing one digit button
between 0 and 9.
STBY : stand by button : - to start projection when the power switch is
switched on.
- to switch off the projector without switching off the
power switch.
PAUSE : to stop projection for a short time, press 'PAUSE'. The image
disappears but full power is retained for immediate restarting.
Digit buttons : direct input selection.
Picture controls : use these buttons to obtain the desired picture analog
level (see also 'Controlling').
PHASE : to adjust the instability of the image.
TEXT : when adjusting one of the image, e.g. controls during a meeting, the
displayed bar scale can be removed by pressing 'TEXT' key first. To re-
display the bar scale on the screen, press 'TEXT' key again. 'TEXT' key only
active in operational mode.
FREEZ : to stop the image projection on the actual projected image.
ENTER : to start up the adjustment mode or to confirm an adjustment or
selection in the adjustment mode.
EXIT : to leave the adjustment mode or to scroll upwards when in the
adjustment mode.
Control stick key : to make menu selections when in the adjustment mode.
The control stick can move forward, backward, to the right or to the left.
Comparision between control stick movement and the use of the arrow keys
on the local keypad :
RCU
=
local keypad
control stick forward
=
arrow key up
control stick backward
=
arrow key down
control stick to the right =
right arrow key
control stick to the left
=
left arrow key
RC operating indication : lights up when a button on the remote control is
pressed. (This is a visual indicator to check the operation of the remote
control)
3
4
5
6
7
8
9
10
11
12
13
14