Barberan RP-30-FM1, Инструкция по эксплуатации

Страница: 25 / 129

When you finish the configuration of all parameters, proceed as
follows :
1. Go to the parameter P18 and enter the key number 5000 to block the
function parameters which will be adjusted later. Then push the key “ FUNC
“.
NOTE: “ When the key number is between 2 and 4999 the SP
(working temperature) can be always modified, permitting in this manner the
access to modify the rest of operative parameters. If the key number is
between the 5000 and 9999, the SP and the two alarms can be always
modified, permitting in this manner the access to modify the rest of operative
parameters.
After this, the configuration is finish, and the instrument will show “- - -
-“ on both displays.
In case of no further programmations, push FUNC and the
instrument will start the configuration procedure.
For a complete configuration, push the keys arrow UP/DOWN programming
the value 234 on the upper indicator.
Push the FUNC key and the instrument starts the auxiliar configuration
showing the following additional parameters (they are suitable to work with
Extruder and application roller, except parameter P23 which will be different
between one and the other – this parameter is used to false the
temperature) :
P19 DIR Alarm 1 relay action
P20 OFF Enable STAND BY of alarm 1