Barberan RP-30-FM1, Инструкция по эксплуатации

Страница: 16 / 129

MAQUINARIA PARA EL ACABADO DE SUPERFICIES MACHINERY FOR FINISHING SYSTEMS
LAMINATION ROLLERS AND WHEELS
The positioning of the rollers must be done stopping first the conveyor
wheels. Introduce the profile on the conveyor wheels and, once the stop is
assured through switching off the main switch, begin the positioning of the
lamination rollers and wheels. If possible, adjust the lamination rollers
always when the conveyor has been stopped.
Only when a good wrapping is reached proceed to adjust the wrapping
rollers while the conveyor wheels are in motion. The adjustment is done
blocking and unblocking the union pieces placed at the extreme most far
away from the arms respect the lamination wheel.
This adjustment can be only performed by a person which has been
instructed in this speciality.
At the machine zones near to the lamination wheels, you can find placards
advising that the hands could be pressed between the lamination or
conveyor wheels. So every manipulation near to the molding rollers must be
done with stopped conveyor.
In case you have to introduce or go with the foil or veneer between the
lamination wheels while the conveyor is running, please use the wooden
tools. Do not use your hands, as it is very dangerous.
¡ WARNING !
DON´T TOUCH
ROLLERS
IN MOVEMENT