Barberan RP-30-FM1, Инструкция по эксплуатации

Страница: 2 / 129

MAQUINARIA PARA EL ACABADO DE SUPERFICIES MACHINERY FOR FINISHING SYSTEMS
DESCRIPTION
Special machine for the continuous application of paper foils, PVC or similar
materials upon profiles made of wood, chipboard, aluminium, rigid PVC, etc.
using solvent based polyurethane glues.
The machine is equipped with a hot melt head which is applied upon
wooden veneer sheets or paper foil or veneer in spool.
The introduction of the profile into the machine is done by a feeder or
manually upon the conveyor rollers of the machine
The wrapping foil is supplied in spool and has to be placed into the uncoiling
shaft which is equipped with an adjustable brake. In an appropriate
application head the back side of the foil will be impregnated with solvent
based polyurethane glue. Inside a hot air tunnel the glue will be evaporated.
When the foil passes in front of a IR lamp tunnel the glue will be reactivated.
The veneer sheet for the wrapping are stored in a table at the infeed of the
hot melt glue application head and will be introduced manually over the glue
application roller. If paper or veneer are supplied in spool, they will be
assembled into another uncoiling shaft and the beginning of the foil will be
put upon the application roller.
The profile to be wrapped and the wrapping foil coincide in a point under the
first pressure roller. Then the wrapping process will be realised along the
machine through a lamination system using pressure rollers with different
shapes in order to be adapted to the exterior form of the wrapping zone of
the profiles. The adaptation of the wrapping foil to the profile is done
progressively and will be assured keeping the profiles pressed. This
produces a perfect adherence of the foil over the profiles.