5.
Inspect the valve connection port and regulator assembly.
Look for damage or debris. Remove any debris. Inspect
hose for damage. Never use damaged or plugged equip-
ment.
6.
When connecting the hose and regulator assembly to the
tank valve, hand tighten nut clockwise to a full stop. Do
not use a wrench to tighten because it could damage the
Quick Coupling Nut and result in a hazardous condition.
7.
Open the tank valve fully (counterclockwise). Use a
soapy water solution to check all connections for leaks
before attempting to light your grill. See ”Checking for
Gas Leaks” on page 14. If a leak is found, turn the tank
valve off and do not use your grill until the leak is
repaired.
Disconnecting An LP Gas Tank From Your Grill.
1.
Turn the burner valves and LP gas tank valve to the full
OFF position. (Turn clockwise to close.)
2.
Detach the hose and regulator assembly from the LP
gas tank valve by turning the Quick Coupling Nut coun-
terclockwise.
CAUTION: When the appliance is not in use, the gas
must be turned off at the supply tank.
Connecting Natural Gas To Your Grill
1.
Connect from the outlet manifold to the 12ft. Hose and
QD(Quick Disconnect) on cart model or the Natural
Gas Regulator to stainless steel flexline & shut-off
valve for built-in installation (pages 6 & 7).
2.
Cart model: Pass the hose through the hole in the cart
and connect the 12ft hose directly to the Natural Gas
Regulator. Make sure you have installed a Shutoff Valve
on the supply line.
3.
Turn the gas supply on and fully open the shutoff valve.
Use a soapy water solution to check all connections for
leaks before attempting to light your grill. See ”Checking
for Gas Leaks” on page 14. If a leak is found, turn the
gas supply off and do not use your grill until the leak is
repaired.
WARNING
A strong gas smell, or the hissing sound of gas indicates a
serious problem with your gas grill or the LP gas tank.
Failure to immediately follow the steps listed below could
result in a fire or explosion that could cause serious bodily
injury, death, or property damage.
Shut off gas supply to the grill.
Turn the Control Knobs to the
OFF
position.
Open grill lid.
Get away from the LP gas tank.
Do not try to fix the problem yourself..
If odor continues or you have a fire you cannot extin-
guish, call your fire department.
Do not call near the LP gas tank because your telephone is
an electrical device and could create a spark resulting in
fire and/or explosion.
NOTE:
The normal flow of gas through the regulator and
hose assembly can create a humming noise. A low volume
of noise is perfectly normal and will not interfere with opera-
tion of the grill. If humming noise is loud and excessive you
may need to purge air from the gas line or reset the regula-
tor excess gas flow device. This purging procedure should
be done every time a new LP gas tank is connected to your
grill. For help call the Customer Service Helpline for assis-
tance.
15
Figure 30
Turn counterclockwise
to disconnect
Turn clockwise
to close
OFF
Figure 29
Turn counterclockwise
to open
Figure 28
Figure 31
Содержание Grand Endevator GE3BSSLP
Страница 2: ......
Страница 9: ...8 PARTS DIAGRAM MODELS GE3BSSLP GE3BSSNG Figure 13 ...
Страница 10: ...9 PARTS DIAGRAM MODELS GE4BSSLP GE4BSSNG Figure 14 ...
