Barazza B_AMBIENT, Руководство по установке

Страница: 32 / 128

20
BEFORE MOUNTING
The instruction manual apply to several versions of the appliance. Accordingly you may find
descriptions of individual features that do not apply to your specific appliance.
Before mounting the hood it is necessary to pay attention to the minimum installation
distances between the lower part of the hood and the upper part of the hob as shown in the
specific mounting pictures. Where it is possible to reach, we advice a distance between 700
and 800 mm.
If the user decides to install the hood at lower distances than the ones shown, the
manufacturer declines any responsabilità for eventual damages caused by the hood
due to strong heat or damages to property or persons caused directly or indirectly by
any type of malfunctioning break down or possible fire.
Arrange for a socket outlet or standard connection to the electric mains; if the hood is
used as a suction hood, it is necessary to make a hole towards the outside (i.e in the
open air) for the scavenging of the fumes.
It is absolutely forbidden for the user to connect the air discharge of the hood, when
used a suction hood, to boiler chimneys, gas, fume or vapour scavenging chimneys or
any other duct, even only ventilation ducts, which have been used or will be used for
other devices. Moreover it is not permitted to connect the scavenging pipe for fumes
in other adjacent rooms or wellholes, or pipes for fire-fighting devices. In any case it
is necessary to respect all norms concerning scavenging of the air. Any user who
does not adhere to these instructions is risking his own life and the lives of others. In
this case, the manufacturer declines any responsibility.
If the hood is used as a suction hood, it is necessary for qualified personnel to make a
hole for ventilation on the outside wall. If the cooker is gas, it is not advisable to use the
hood at the same time are fireplaces, furnaces, gas or other fuel stoves, or water heaters
which burn up oxygen from the environment in order to function, and in any case
depression in the cooker area must be below 4 Pa (0,04 mbar) and the room must be
sufficiently aired.
If in doubt, national and international standards precisely indicate the rules for the state of art
installation of gas systems and for environment air change, to avoid the possibility of
incomplete combustions with the risk of poisonous fumes being emitted.
If the hood is to be used as a filtering hood, it is necessary to purchase carbon filters
(see
OPTIONAL ACCESSORIES).
MOUNTING INSTRUCTIONS
Mount the cooker hood as shown in the pictures of the M series if the hood is used for
suction use, or C series if the hood is used for filtering use.
The hood is equipped with standard fixing material. The person who is mounting the
hood should make sure that the fixing elements are right and suitable for the walls
and ceilings he finds. The manufacturer declines any responsibility for damages
caused by incorrect mounting.
The cooker hood is heavy and in order to move it 2 persons are needed.
The packaging material is dangerous for childen. Never allow the children to play with the
packaging material.