Barazza B_AMBIENT, Руководство по установке

Страница: 38 / 128

26
It sets the highest speed of the motor which is shown by a and after 5
minutes the second speed is automatically set.
TIMER: if you press this push button when the hood is working at the first,
second or third speed, the motor is automatically stopped after 15 minutes.
During the period of the timer the display will show the speed in a fix way
and the led point is flashing. Ex.
Display in Stand-by: the motor of the hood is off.
Flashing Display: the grease filters must be cleaned.
Flashing Display: the carbon filters must be replaced or regenerated.
AUTOMATIC CONTROL OF GREASE AND CARBON FILTERS
The electronic controls with display allow automatic control of the grease filters and the
carbon filters (only when the hood is used in the filtering version), so that the user does
not have to remember when maintenance was last carried out.
When the metallic grease filters have to be cleaned, the letter on the display will flash.
When the carbon filters have to be replaced or regenerated, the letter on the display
will flash.
It is possible to consult the electronic system concerning how clean the grease filters are
and how worn the carbon filters are, as follows: stop the motor and...
…to find out how clean the fat filters are, press the
and buttons at the same time.
On the display, a number between 0 and 9 will appear, the smaller the number, the dirtier
the filter is.
…to find out how worn the carbon filters are, press the buttons
and . On the
display, a number between 0 and 9 will appear, the smaller the number, the more worn
the filter is.
TO PUT THE GREASE AND/OR CARBON FILTER CONTROL BACK TO ZERO. +
After making maintanance to filters you have to:
■
stop the motor (stop position);
■
push the push-buttons and at the same time for a few seconds. This symbol
appears and a “bip“ is issued.
SETTING THE SUCTION/FILTERING USE OF THE HOOD. + ; ;
The hood is delivered standard for suction use (only with flashing letter). If you wish to
use it in the filtering version ( and flashing) proceed as follows:
■
press the buttons and , for about 5 seconds, the following symbol will appear
on the display followed by a
0 .
■
at each pressure of the , it is possible to change the value shown from the 0
(suction function), to 1 (filtering function) and viceversa.
■
press the button to confirm the choice effected in the previous point.