Barazza B_AMBIENT, Руководство по установке

Страница: 36 / 128

24
SOFT TOUCH CONTROL WITH DISPLAY AND RECTANGULAR PUSH BUTTONS
It switches the lights on and off.
It switches the motor off.
It increases the speed of the motor.
The highest speed of the motor is shown with and after 10 minutes the
second speed comes automatically.
It reduces the speed of the motor.
TIMER. It activates the hood at speed 1 for 10 minutes after which the
motor stops in automatic way. With timer in function the display is showing
a flashing led point.
AUTOMATIC CONTROL OF GREASE FILTERS AND CARBON FILTERS
The electronic controls with display and rectangular push buttons allow automatic control
of the grease filter and of the carbon filter (only when the hood is used in filtering
version) so that the user does not have to remember when maintanance was last carried
out.
When the grease filters must
be cleaned , there is flashing in the display and an
acoustic signal is issued.
When the carbon filters must
be replaced, there is the letter flashing in the display and
an acoustic signal is issued.
TO PUT THE GREASE AND/OR CARBON FILTER CONTROL BACK TO ZERO. +
After filter maintanance has been carried out you have to:
■
Stop the motor (stop position);
■
Press twice in succession the push button, to confirm that reset has been made
the symbol is appearing in the display and a “beep” is issued.
SETTING SUCTION/FILTERING FUNCTION. +
The hood is delivered standard as a suction hood (saturation indicator ).
If you wish to use the hood as filtering (saturation indicator and ) please do the
following:
■
Press at the same time for ca 5 seconds the push buttons + , in the
display you will have the symbol followed by an acoustic signal.
To reset the hood just for suction use, repeat the above, in the display you will have the
symbol appearing.
Additional Functions: SECONDARY LIGHT.
If you keep on pressing the light Push button for more than 1 second you activate/or
disactivate the secondary lights.