Barazza B_AMBIENT, Руководство по установке

Страница: 39 / 128

27
SOFT TOUCH CONTROLS WITH LIGHT BEHIND
To switch the lights on or off.
Turn the motor off.
It sets the speed no. 1 and the led of the push button is switched on, if the
first speed is already on, the led of the push button will flash and the motor
stops automatically after 10 minutes.
It sets the speed no. 2 and the led of the push button is switched on, if the
second speed is already on, the led of the push button will flash and the
motor stops automatically after 10 minutes.
It sets the speed no. 3 and the led of the push button is switched on, if the
third is already on, the led of the push button will flash and the motor stops
automatically after 10 minutes.
It sets the highest speed of the motor and the led of the push button will
flash and after 10 minutes automatically the hood goes back to the second
speed.
AUTOMATIC CONTROL OF GREASE AND CARBON FILTERS
The electronic controls with light on the back allow automatic control of the grease
filters, so that the user does not have to remember when maintenance was last carried
out.
When the metallic grease filters have to be cleaned, an acoustic signal is issued; if you
stop the motor the acoustic signal is stopped, but the light of the button is flashing.
If the hood is used for filtering use the carbon filters must be replaced or regenerated
each 2 cleaning cycles of the grease filters.
HOW TO PUT BACK TO ZERO THE GREASE FILTER COUNTER. +
After you have cleaned the grease filters you have to:
■
stop the motor;
■
press twiche the push button . To confirm that the reset has been done an acoustic
signal is issued and the led of the push button stops flashing.
Additional Functions: SECONDARY LIGHTS.
If you press the light push button in a longer way than 1 second you
activate/deactivate the secondary lights.
Additiona Functions: INTERVAL FUNCTION. + / / ;
The motor is switched on automatically 10 minutes each hour at the speed flashing
shown on the display.