XIRING – Ingenico Healthcare / eID – Baracoda orKan ‘barcode’ – User Guide v1.5
18/35
X.
Configuring your orKan terminal
There are two (2) ways to configure your orKan terminal:
-
when connected to a PC, the Baracoda Desktop Manager software can be used for
multiple setting changes.
-
the configuration barcodes in the Programming Guide can be used to configure the
terminal without using any software applications.
1)
Reset to default settings
To reset the orKan terminal to default settings, the user can use the Baracoda Desktop
Manager or scan the Reset Configuration barcode.
To reset the
orKan –L (1D CMOS) and –LA (laser)
, please scan only the “Reset factory
defaults” barcode:
Reset factory defaults (with reboot)
To reset
Orkan –Fs and –Fe (2D Imagers),
please scan the “Reset factory defaults” and then
the “Reset decoder factory defaults” barcode:
Reset factory defaults (with reboot)
Reset decoder factory defaults
2)
Bluetooth Security Settings
Every Bluetooth connection is secured with a PIN code authentication. You can configure
security (enable/disable/change PIN code) with the Baracoda Desktop Manager software
(Bluetooth tab in the Device Settings module) or with the Programming Guide.
Bluetooth security is enabled by default and the default PIN code is
0000 (zero zero zero
zero)
.