XIRING – Ingenico Healthcare / eID – Baracoda orKan ‘barcode’ – User Guide v1.5
11/35
Note
: When you insert the orKan in a charging cradle, the terminal will:
-
emit a beep
-
and automatically switch ON (if it was OFF) followed by displaying the dedicated ‘
frozen
display
’
(cf below)
Whenever an orKan terminal is put in the cradle, the right-hand side LED of the cradle will be
green.
The left-hand side LED of the cradle will be switched on if a battery is put in the cradle (behind
the terminal). If the battery is charging, the LED color will be red. As soon as it has been fully
charged, the left-hand side LED will be green.
Note:
the right-hand side LED of the cradle will always be green if a terminal is put in the cradle
(whether its battery is charging or fully charged).
