497-0478005
Rev A
P1535/P1235 Quick Reference
Guide
Graphical Overview
Accessories Included
Power Connection
10ft (3m) Network Cable
6ft (2m) Power Cable 90
°
The P1535/P1235 has an integrated 19 V, 90 W power supply rated
for 110 V and 240 V (auto-sensing), 50 Hz or 60 Hz located in the
base.
If the power supply is not installed in the base of the P1535/P1235:
a) remove upper stand cover b) loosen thumbscrew that secures the
base cover c) route AC power cord thru base d) install power brick in
base e) secure cables behind CableLock Cover and close all.
a)
b)
c)
d)
e)
Power Button and I/O Panel Access
1
– Removable SSD
2
– Power Button
3
– Recovery Button
4
– RJ12 Cash Drawer
5
– HDMI
6
– Display Port
7
– Power In
8
– RJ45 Serial Ports (2)
9
– Ethernet Port
10 –
USB 3.0
11 –
RJ12 Serial Ports (2)
12 –
12V Powered USB
13–
RJ12 Serial Port
14
–
USB 3.0 (3)
Expansion Options:
A
– 24V Powered USB +
RJ12 Serial Ports (2)
B
– 5V USB + RJ12 Serial
Ports (2)
C
– RJ45 Serial Port + SIM
+ POE
NCR Recovery Utility
P-Series stand removal
The NCR Recovery utility can be used to restore
the factory provided image, or make backups. The
default password is “Recovery1234”.
To start the recovery process, tilt head back to
expose the I/O panel. The unit must be powered
off before beginning the process.
Press and hold the recovery button. While
holding the recovery button, press the power
buttom to power on the unit. Wait 5 seconds,
and release both buttons.
Recovery Button
*Press once and release
Lay terminal face down on a flat surface.
Remove the screws (2) that secure the Base Stand to
the display.
Rotate the P-Series Stand and remove the Mounting
Plate Tabs (2) from the openings in the Rear Cover.
Note: 24V Power Supply is external to base
X-Series Stand
Wall Mount
P-Series Stand
