bar Comet AX Series, Инструкции по сборке, эксплуатации и техническому обслуживанию

Страница: 5 / 20

20
FOREWORD
This manual consists of two distinct parts.
The first is intended for both the end user and the Skilled Technician and contains the pump operation and
maintenance instructions; the second is dedicated to the Skilled Technician only and provides instructions
for the correct integration of the pump in the end machine and for special maintenance.
By Skilled Technician is meant:
• the Manufacturer of the machine (e.g., high pressure cleaner) in which the pump is integrated (from now
on, when reference is made to “machine in which the pump is integrated”, this may also refer to “system in
which the pump is integrated”, such as, for example, in the case of a pumping station);
• a person, normally belonging to the after-sales centre, specifically trained and authorised to perform special
maintenance jobs and repairs on the pump and on the machine in which this is integrated. It should be
remembered that jobs on the electrical parts must be performed by a
Skilled Technician
who is also a
Professional Electrician
, meaning a person professionally qualified and trained to check, install and repair
electrical apparatus in a “workmanlike” manner and in accordance with the laws applicable in the country
where the machine integrating the pump is installed.
PART ONE
GENERAL INFORmATION
Carefully read this manual and the manual of the machine in which the pump is integrated:
always carefully
comply with the instructions contained in them.
Special care must be given to reading the parts of the text marked by the symbol:
WARNING
inasmuch as these contain important safety instructions concerning pump operation.
The Manufacturer disclaims all liability relating to damage caused by:
• failure to abide by the contents of this manual and the manual of the machine in which the pump is integrated;
• the pump being used in ways other than those indicated in the
“I
NTENDED USE
”
paragraph;
• the pump being used in ways contrary to applicable laws on safety and prevention of work accidents;
• tampering with the safety devices and with max operating pressure limitation;
• incorrect assembly and installation;
• incorrect maintenance;
• changes made or jobs done on the pump without the permission of the Manufacturer;
• use of non-original spare parts or which are not suitable for the pump model;
• repairs not performed by a
Skilled Technician
.
USING AND LOOKING AFTER THE mANUAL
WARNING
• This manual completes that of the machine in which the pump is integrated:
read all the manuals carefully.
The manual must be deemed an integral part of the pump and must be looked after for future reference and
kept in a protected place where it can easily be referred to in case of need.