bar Comet AX Series, Инструкции по сборке, эксплуатации и техническому обслуживанию

Страница: 17 / 20

32
OPTIONAL ACCESSORIES
WARNING
• Inadequate optional accessories could negatively affect pump operation and make this hazardous. Only ever
use original optional accessories recommended by the Manufacturer.
• As regards general information, safety precautions,installation and maintenance of optional accessories, refer
to the accompanying documents.
The standard pump equipment can be integrated with the following range of accessories:
• pressure unloader/regulation valve;
• safety valve;
• thermal valve;
• suction filter;
• suction fitting of various shapes and sizes;
• pressure gauge;
• etc.
For further details contact your dealer.
APPLICATIONS
WARNING
• Adequately protect the moving parts with suitable guards. Special attention must be given to pulley applications.
• The pump must operate without exceeding the pressure limits and rotation speed as shown on the plate (7)
(also refer to the “s
peciFications and technical data
” paragraph). In particular, always make sure the pressure
unloader/regulation valve is correctly set and that this setting is guaranteed, e.g., by paint coating.
• The pump must always be firmly fastened either to the motor flange or on a stable base by means of the feet
(optional).
The pumps described in this manual, depending on the model, are available in versions for numerous
applications:
• female shaft Ø 3/4” for internal combustion engine with flange SAE J 609 A;
• female shaft Ø 1” for internal combustion engine with flange SAE J 609 A;
• female shaft Ø 5/8” for electric motor NEMA 56 C;
• female shaft Ø 24 mm for electric motor MEC size 90 B3 - B14;
• male shaft Ø 24 mm for special electric motor with female shaft or for pulley;
• female shaft Ø 20 mm for internal combustion engine with gear reduction unit;
• female shaft Ø 28 mm for electric motor MEC size 100-112 B3 - B14;
• female shaft Ø 1”1/8 for electric motor NEMA 182-184 TC;
• female shaft Ø 25 mm for internal combustion engine with gear reduction unit;
• male shaft Ø 30 mm for special electric motor with female shaft or for pulley or for gear reduction unit or
for flexible coupling.
The Manufacturer’s After-Sales Service is at the disposal of the
Skilled Technician
to provide all necessary
information to identify the most adequate application and its correct execution. Pump applications must in
any case be executed according to proper rules of mechanical engineering.
The pump is able to turn both clockwise and anticlockwise.