bar Comet AX Series, Инструкции по сборке, эксплуатации и техническому обслуживанию

Страница: 19 / 20

34
SPECIAL mAINTENANCE
Follow the instructions in the corresponding paragraph of section one.
The tightening torques to be used are shown on the following table (refer to Fig. 5).
Tightening torques Nm (lb.ft)
Description AX bX bW AW LW ZW FW
Adhesive to
be applied
a
Head screws 25 (18,4) 25 (18,4) 10 (7,4)
< 230bar 10 (7,4)
10 (7,4) 25 (18,4)
> 230bar 80 (59,0)
b
Valve caps (aluminium head) 35 (25,8) 40 ( 9,5) Loctite 243
Valve caps (brass head) 45 (33,2) 45 (33,2) 45 (33,2) 45 (33,2)
< 230bar 50 (36,9)
50 (36,9)
Loctite 243
> 230bar 60 (44,3) Loctite 243
c Cover screws 4 (3,0) 4 (3,0) 4 (3,0) 9 (6,6)
e
Crankcase cover screws 9 (6,6) 9 (6,6) 9 (6,6) 4 (3,0)
f PTO flange screws 9 (6,6) 9 (6,6) 9 (6,6) 25 (18,4)
g
Plunger nuts 6 (4,4) 6 (4,4) 6 (4,4) 10 (7,4) Loctite 243
h Eccentric shaft screw 25 (18,4) Loctite 243
i
Crankcase screws 25 (18,4) 25 (18,4)
Tightening torques Nm (lb.ft)
Description FW 2 HW RW SW TW
Adhesive to
be applied
a
Head screws 25 (18,4) 25 (18,4) 25 (18,4) 45 (33,2) 45 (33,2)
b
Valve caps (brass head)
< 230bar 50 (36,9)
80 (59,0)
< 230bar 50 (36,9)
80 (59,0)
Loctite 243
> 230bar 80 (59,0) > 230bar 80 (59,0) < 360bar 80 (59,0) Loctite 243
> 360bar 80 (59,0) Loctite 270
c
Cover screws 9 (6,6) 9 (6,6) 9 (6,6) 25 (18,4) 25 (18,4)
d Connecting-rod screws 25 (18,4) Loctite 243
e
Crankcase cover screws 4 (3,0) 4 (3,0) 4 (3,0) 9 (6,6) 9 (6,6)
f PTO flange screws 25 (18,4) 25 (18,4) 25 (18,4) 25 (18,4) 25 (18,4)
g
Plunger nuts 10 (7,4) 10 (7,4) 10 (7,4) 15 (11,1) 15 (11,1) Loctite 243