BAQ dynaROCK II, Руководство пользователя

Страница: 27 / 46

MEMORY FUNCTIONS
8.1 New Series
In the menu item Memory functions / New series , the name of a new series
of measurements can be stipulated with the text entry function (see 4.4). On
completion of the input, the measurement window is opened and the measured
hardness numbers are stored under this name.
The measuring parameters active before the input of the name for the new
series of measurements are employed. These measuring parameters cannot
be changed as long as the hardness numbers are stored.
The recording of the series of measurements is ended when the measurement
window is closed. The request follows as to whether the hardness numbers
should be finally stored in this series.
8.2 Continue measurement in existing series
Under menu item
Memory functions / Continue series of measurements
,
a series of measurements can be selected to which the new measured values
are attached. If the series of measurements was begun with an impact device
type other than that currently connected, a continuation of the measurement is
not possible.
8.3 Deleting a series
If series of measurements is no longer required, it can be deleted under menu
item
Memory functions / Delete
.
8.4 Displaying a series
The content of a series of measurements can be displayed and edited at this
point, together with the statistical information (see 6.3.1).
8.5 Data transfer
The saved series of measurements can be transferred to the PC by means of
the transfer program supplied with the
dynaROCK II
.
For that, the
dynaROCK II
has to be connected to the PC via USB. The
27