BAQ dynaROCK II, Руководство пользователя

Страница: 32 / 46

SYSTEM SETTINGS
9.4.4 Query whether series should be saved
Under the menu item System / Configuration / Save series query you can
determine if you want to be queried whether the data should be saved when
you close the measuring or statistics window. Select 'Off' to turn off the query
and 'On' otherwise.
9.4.5 Query whether values should be printed
Under the menu item System / Configuration / Print values query you can
determine if you want to be queried whether the data should be printed when
you close the statistics window. Select 'Off' to turn off the query and 'On'
otherwise.
9.4.6 Tensile strength unit
Under the menu item System / Configuration / Tensile strength unit it can be
selected if the unit of tensile strength should be displayed as Mpa (Megapascal)
or N/mm2 (Newton per square millimetre).
9.5 Impact device calibration
The menu item System / Impact device calibration is for the import of the
calibration values. Every time, when you buy a new impact device or an impact
device was sent for calibration to our technical service, the calibration value will
be delivered on a USB flash drive. For transferring the calibration to the
dynaROCK II
the flash drive has to be plugged in and the menu item System /
Impact device calibration has to be selected.
32
Select:
Open dialog If the new material should be selected in a dialog.
Next material If the material should be set automatically to the
next valid material.