Banner Q4X Series Скачать руководство пользователя страница 19

Страница: 19 / 46

Action

Result

Four-pulse the remote input.

The sensor is ready to have the button state

defined

and

displays.

2. Lock or unlock the sensor buttons.

Action

Result

Single-pulse the remote input to unlock the sensor.

displays and the sensor returns to

Run mode.

Double-pulse the remote input to lock the sensor.

displays and the sensor returns to

Run mode.

Triple-pulse the remote input to apply the operator lock
to the sensor

displays and the sensor returns to

Run mode

3.6 TEACH Procedures

Use the following procedures to teach the sensor.

To cancel a TEACH procedure, press

TEACH

for longer than 2 seconds, or hold the remote input high for longer than 2 seconds.

momentarily displays when a TEACH procedure is canceled.

After any teach operation starts, the display temporarily

flashes

CH1 or CH2 to

confirm

which channel is currently selected.

3.6.1 Two-Point Static Background Suppression

Two-point TEACH sets a single switch point. The sensor sets the switch point between two taught target distances, relative to the
shifted origin location.

Press and Hold

> 2s

Press again

Switch

Point

Value

Figure 17. Two-Point Static Background Suppression (Light Operate shown)

Note:

The sensor must be set to

to use the following instructions.

Note:

To program the sensor using remote input, remote input must be enabled (

1. Present the target.

Method

Action

Result

Push Button

Present the

first

target. The sensor-to-target distance must be within the

sensor's range.

The target's measurement value
displays.

Remote Input

Q4X Stainless Steel Laser Sensor with Dual Discrete Outputs and IO-Link

www.bannerengineering.com - Tel: 763.544.3164

Содержание Q4X Series















































Результаты поиска

Содержание Q4X Series

Отзывы:

Бренды по названию

Популярные бренды

Banner Q4X Series, Инструкция по эксплуатации

Результаты поиска

Содержание Q4X Series

Отзывы:

Бренды по названию

Популярные бренды